P series connector plug assembly instructions
DOWNLOAD Plug assembly instructions:
P series connector plug
1. The cable is passed through the tail nut 1 in sequence, and the cable clamp 2 is soldered to the corresponding position of the insulator assembly 3.
2. Attach the cable clamp 2 to the welded insulator assembly 3, paying attention to the projection of the cable clamp 2 and the groove of the insulator 3.
3. Insert the insulator assembly 3 into the header assembly 4, noting that the projections on the cable clamp 2 are to be correspondingly fitted to the recesses in the header assembly 4.
4. Insert the tail nut 1 into the plug assembly 4 and tighten the tail nut